Mar 24, 2016 路 Remove the 13mm nut on the tensioner pulley. Do not lose the washer. Slide the belt off of the water pump, then take the belt off of the rest of the components. Remove the tensioner. Remove the three 10mm bolts from the water pump. These bolts have a weird thread to them, so do not lose them. Remove the water pump.
Sep 12, 2020 路 The Audi A4 B7 lived so little because it was essentially an intense facelift of the Audi A4 B6. Same platform, with some updates and some improvements. The B7 went a little too much on the safety side and less on the fun side, especially the electronics. An ABS, an ESP, a can of beer, a brake drying system in case of rain, a system that works Jun 24, 2021 路 The upper control arm connects to the uppermost area of the front wheel and the lower control arm connects to the lower most area of the front wheel, with boJun 29, 2019 路 Well at least the exhaust is still exiting from the tailpipes so IMO this is the best solution to date. However I really don't get it, if you maintain your vehicle it take 2 mins to clean the exhaust during a wash..
Dec 25, 2014 路 Step 3. Gently pull the plastic tab on the connector away from the coil pack. While pulling, slide the connector off the coil pack. You can use the screwdriver to help if necessary, but take caution not to break the tab. Repeat for however many coil packs you are replacing. Note: You may need to remove the coil pack harness from all (4) coil uTDhiSy.